Wood Adhesive Everbuild 502 PVA

Everbuild Wood Glue Adhesive – All Purpose Waterproof PVA Wood High Strength 502
Everbuild 502 Weatherproof All Purpose Wood Glue Adhesive
WOOD ADHESIVE is a medium viscosity, resin based polymer emulsion which exceeds the water resistance requirements of BS EN204 D3.
The product is also suitable for load bearing work as it conforms fully to the BS 14256 Sustained Load requirements.
Benefits
Excellent rate of bond strength development.
High degree of water resistance
Interior/exterior use.
Low timber staining characteristics – will not stain.
Creep Resistant.
Dries clear – contains no inert fillers.
Water based – environmentally friendly/easy clean up.
Suitable for radio frequency cure.
Areas For Use
As a waterproof/creep resistant wood adhesive, internally and externally.
Surface Preparation
All surfaces must be clean, dry and free from grease.
Application
Apply adhesive thinly to both surfaces. Do not over apply as this will slow down cure. Clamp surfaces together until adhesive dries. (off in 1-2 hours: full strength 8 hours). Support until fully cured (8 hours at 20°C).
When fitting dowels, the adhesive should be applied to the holes.